Edit From A Camcorder - JVC HR-S6722EK Instructions Manual

Edit From
A Camcorder
1
4
7
AUX
1
NOTES:
All necessary cables can be obtained from your dealer.
You can also use another video recorder as the player instead
of a camcorder.
When you select "EDIT" to dub tapes in step 3, be sure to
select "AUTO" (or "NORM" when "B.E.S.T." is set to "OFF")
after you finish dubbing the tapes.
A If the camcorder has no S-VIDEO output connector...
Recorder
AUDIO input
VIDEO
input
Audio Cable (not provided)
Video Cable (not provided)
VIDEO OUT
Camcorder
AUDIO OUT
Player
– –:– –
3
2
2
5 6
8 9
4
0
PR
?
You can use a camcorder as the source player and your video
recorder as the recorder.
MAKE CONNECTIONS
1
A If the camcorder has no S-VIDEO output connector...
... connect the camcorder's AUDIO/VIDEO OUT
connectors to the recorder's front panel AUDIO/
VIDEO input connectors.
B If the camcorder has an S-VIDEO output connector...
... connect the camcorder's S-VIDEO OUT and
AUDIO OUT connectors to the recorder's front
panel S-VIDEO and AUDIO input connectors.
When using a monaural camcorder, connect its
AUDIO OUT connector to the AUDIO L input
connector on your recorder.
SET RECORDER'S INPUT MODE
2
Press AUX and/or PR to select "F-1" for the AUDIO/
VIDEO input connectors, or "S-1" for the AUDIO/
S-VIDEO input connectors, depending on the connec-
tors being used.
SET EDIT MODE
3
See "Picture Control" on page 32.
START CAMCORDER
4
Engage its Play mode.
START RECORDER
5
Engage its Record mode.
B If the camcorder has an S-VIDEO output connector...
Recorder
AUDIO input
S-VIDEO
input
Audio Cable (not provided)
S-Video Cable (not provided)
S-VIDEO OUT
Camcorder
AUDIO OUT
Player
33