Konica Minolta Bizhub C200 User Manual page 66

Installation on Macintosh computers
5
Select a printer driver manually.
– Select "KONICA MINOLTA" in "Printer Model", and then select the desired model from the list of
model names.
6
Click the [Add] button.
If the selected printer is registered in the printer list, the setting procedure is completed.
Specifying the LPR settings
Specifying the IP address setting for this machine
Specify the IP address of this machine.
!
Detail
For details on specifying the IP address of this machine, refer to the User's Guide [Network
Administrator].
LPD setting for this machine
To use LPR printing, enable the LPD setting in the TCP/IP Setting screen of this machine.
!
Detail
For details on the LPD settings of this machine, refer to the User's Guide [Network Administrator].
Specifying the TCP/IP setting for the computer
Specify the TCP/IP setting for the Macintosh computer connected to this machine.
1
On the "Apple" menu, select "System Preferences".
2
Click the "Network" icon.
3
From "Show", select "Built-in Ethernet".
4
Click the TCP/IP tab.
5
Select "Configure" items according to the settings for the network to which the Macintosh computer is
connected, and then specify the IP address and subnet mask.
6
Click the close button at the upper left corner of the dialog box.
– When the "Apply configuration changes?" message appears, click the [Apply] button.
C200
5
5-10