Diting; Edit From A Camcorder - JVC HR-S4600U Instructions Manual

48
EN
Edit From A
Camcorder
AUDIO IN
Recorder
S-
VIDEO
IN
VIDEO
IN
Audio/Video
cable
(supplied)
S-VIDEO
cable
(supplied)
VIDEO
OUT
S-VIDEO
OUT
CH
NUMBER "0"
1
MENU
Your VCR
To rear panel
REMOTE PAUSE/AV
COMPULINK
connector
Mini-plug cable
(not supplied)
(JVC camcorder
only)
AUDIO
OUT
EDIT
Camcorder
Player
0
4
OK
SHUTTLE PLUS
You can use a camcorder as the player and your VCR as the recorder.
MAKE CONNECTIONS
1
Connect an AV cable between the camcorder's VIDEO
OUT and AUDIO OUT connectors and your VCR's
VIDEO IN and AUDIO IN connectors.
If connecting a camcorder with an S-VIDEO output
connector, it is recommended to use the S-VIDEO
connection to minimize picture degradation while editing.
When a Master Edit Control-equipped JVC camcorder is
used, the camcorder is capable of controlling your VCR.
The mini-plug cable is a mono 3.5 mm mini-plug to
mono 3.5 mm mini-plug connector.
If connecting to a camcorder with a monaural output,
JOG
SHATTLE
connect the audio output connector on the
camcorder to AUDIO IN L of the VCR.
LOAD A CASSETTE
2
Insert the cassette to be recorded on into the recorder.
SET RECORDER'S INPUT MODE
3
Set to "AUX". Press the NUMBER key "0" and/or CH to
select depending on the connector being used – "L-1"
for the rear panel input connectors, or "F-1" for the
front panel input connectors.
ACCESS MAIN MENU SCREEN
4
Press MENU.
ACCESS FUNCTION SET SCREEN
5
Press CH 5 ∞ or SHUTTLE PLUS % fi to move the
highlight bar (arrow) to "FUNCTION SET", then press
OK or SHUTTLE PLUS
JOG
SHATTLE
EDITING
#
.