Picture Control - JVC HR-S4600U Instructions Manual

26
EN
1
4
7
1
MENU
PLAYBACK AND RECORDING FEATURES (cont.)
2 3
2
5 6
8 9
0
4
OK
SHUTTLE PLUS

Picture Control

This feature helps you to adjust the playback picture quality
according to your preference. *The default setting is "AUTO."
ACCESS MAIN MENU
SCREEN
JOG
1
SHATTLE
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Move the highlight bar (arrow) to "FUNCTION SET" by
pressing CH5 ∞ or SHUTTLE PLUS% fi , then press OK
or SHUTTLE PLUS #.
SELECT PICTURE CONTROL
SET MODE
3
Move the highlight bar
(arrow) to "PICTURE
CONTROL" by pressing
CH 5 ∞ or SHUTTLE
PLUS % fi , then press OK
or SHUTTLE PLUS # to
select the desired mode.
AUTO*: Normally select
EDIT:
SOFT:
SHARP: Select when you want to sharpen the picture.
NOTE:
• When you select EDIT, SHARP or SOFT, the
selected mode will not change until you select again.
• When you select EDIT to dub tapes, be sure to
select AUTO (or NORM when VIDEO CALIBRATION
is set to OFF) after you finish dubbing the tapes.
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTE:
Select EDIT when you are dubbing tapes. Refer to page 50.
VIDEO CALIBRATION
= PICTURE CONTROL
AUTO TIMER
SUPERIMPOSE
AUTO SP = EP TIMER
VIDEO STABILIZER
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
AUTO.
It automatically adjusts the picture quality.
* When VIDEO CALIBRATION is set to OFF
( pg. 32), you can only select NORM
instead of AUTO.
Select when you dub tapes.
Select when you want to soften the picture.
FUNCTION
ON
AUTO
OFF
ON
OFF
OFF