Tuner Setting; Basic Playback; Manual Channel Set - JVC HR-LTR1U Instructions Manual

– Initial Settings –

Tuner Setting

Setting channels automatically
— Auto Channel Set
Perform Auto Channel Set only if channels have not been set
correctly by the Plug&Play setting.
A
Access Main Menu screen, then Tuner
Set screen
Press MENU on the Remote. Press
move the highlight bar (arrow) to "TUNER
SET", then press OK or .
e
B
Perform Auto Channel Set
Press to move the highlight bar
rt
(arrow) to "AUTO CHANNEL SET", then
press OK or . The VCR selects the correct
e
band (TV or CATV) automatically during
Auto Channel Set.
● When Auto Channel Set is complete,
"SCAN COMPLETED" appears on
screen.
● If the scan was unsuccessful, "SCAN
COMPLETED–NO SIGNAL–" appears
on screen. Check the connections and
start again.
Press MENU to return to normal screen.
Setting channels manually

— Manual Channel Set

You can add the channels you want or delete the channels you do
not want manually.
A
Access Main Menu screen, then Tuner
Set screen
Press MENU on the Remote. Press
move the highlight bar (arrow) to "TUNER
SET", then press OK or .
e
B
Access Manual Channel Set screen
Press to move the highlight bar
rt
(arrow) to "MANUAL CHANNEL SET",
then press OK or .
e
C
Add or skip desired channels
To add channels
A Press the Number keys on the Remote
to input a channel number you want to
add.
B Press OK or
to set to "ADD".
e
C Repeat A to B to add other channels.
Press MENU to return to normal screen.
To skip channels
A Press
or the Number keys to select a channel number you
rt
want to skip.
B Press OK or
to set to "SKIP".
e
C Repeat A and B to skip other channels. Press MENU to return
to normal screen.
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
to
rt
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
TUNER SET
BAND CATV
AUTO CHANNEL SET
MANUAL CHANNEL SET
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END
AUTO CHANNEL SET
SCANNING...
PRESS (MENU) TO END
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
to
rt
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
TUNER SET
BAND CATV
AUTO CHANNEL SET
MANUAL CHANNEL SET
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END
MANUAL CHANNEL SET
(CATV)
CH 45 ADD
PRESS NUMBER KEY (0–9)
OR ( , ), THEN (OK)
PRESS (MENU) TO END
Playback

Basic Playback

A
Load a cassette
Make sure the window side is up, the rear label side is facing you
and the arrow on the front of the cassette is pointing towards the
VCR.
● Do not apply too much pressure when inserting.
● The VCR turns on, and the counter on the on-screen display is
reset, automatically.
● If the cassette's record safety tab has been removed, playback
begins automatically.
B
Start playback
Press PLAY ( ).
4
During playback
Stop playback
Press STOP ( ) on the
8
Remote.
Pause playback and view still picture
Press PAUSE ( ).
9
● Press PLAY (
) to resume normal playback.
4
Pause and Frame-by-Frame playback
Press PAUSE ( ) to pause, then press
9
repeatedly.
● Press PLAY (
) to resume normal playback.
4
Rewind/fast-forward
Press REW ( ) or FF (
3 5
● Press PLAY (
) to resume normal playback.
4
● If you press and hold REW (
2 seconds, simply releasing it cancels the picture search, and
normal playback resumes.
Rewind/fast-forward at variable speed (including slow-motion)
Press or repeatedly.
2 6
● Press PLAY (
) to resume normal playback.
4
● Each time you press
or
2
To decrease the speed during picture search, press the opposite
direction button repeatedly.
● During still picture, press and hold
motion playback. When you release the button, still picture
resumes. During still picture, holding PAUSE (
2 seconds also starts forward slow motion playback. If you
press PAUSE ( ) again, still picture resumes.
9
Reverse
Reverse Reverse
search play
3 steps
OR Press STOP/EJECT (
0
the VCR.
(or PAUSE ( ))
6 9
).
) or FF ( ) for more than
3 5
, the playback speed changes.
6
to start forward slow
6
) for more than
9
Forward
Slow Normal Forward
motion play search
1 step 4 steps
) on