Specifications; Nail Selection; Accessories; Standard Accessories - Hitachi NR 90AC2 Instruction And Safety Manual

English

SPECIFICATIONS

Operating pressure
Dimensions
Length × Height × Width
Weight
Nail capacity
Air consumption
Air inlet

NAIL SELECTION

Be sure to use only the genuine HITACHI nails for the NR90AC2. The use of any other nails can result in tool
malfunction and/or nail breakdown, leading to serious injuries.
Only nails shown in the Table below can be driven with this Nailer.
Plastic-collated strip nails
Full-head nails

ACCESSORIES

Accessories other than those shown below can lead to malfunction and resulting injuries.

STANDARD ACCESSORIES

1 2 3 4 5
70 – 120 psi (4.9 – 8.3 bar 5 – 8.5 kgf/cm
19-13/16" × 13-7/8" × 4-3/4"
(503 mm × 353 mm × 121 mm)
8.9 lbs (4.0 kg)
64 – 70 nails (2 strips)
3
.095 ft /cycle at 100 psi
(2.7 ltr/cycle at 6.9 bar)
(2.7 ltr/cycle at 7 kgf/cm
3/8 NPT Thread
WARNING
Min.
.286"
(7 mm)
.113"
(2.9 mm)
DANGER
1 Eye protector
2 Allen wrench for M8 screw
3 Allen wrench for M6 screw
4 Allen wrench for M5 screw
5 Nose Cap
— 8 —
2
)
2
)
Max.
.327"
(8.3 mm)
.162"
(4.1 mm)
1
1
1
1
1