Connecting/Using A Decoder - JVC HR-J713EU Instructions Manual

34
EN
Connecting/
Using A
Decoder
TV Receiver
AV1 IN/OUT
AV2 IN/DECODER
RF Cable (provided)
ENTREE/DECODEUR ENTREE/DECODEUR ENTREE/SORTIE ENTREE/SORTIE
AV2 AV2 AV1 AV1
R R
IN/DECODER IN/DECODER IN/OUT IN/OUT
AUDIO AUDIO
L L
Decoder
SYSTEM CONNECTIONS (cont.)
The AV2 IN/DECODER connector can be used as an input
terminal for an external decoder (descrambler). Simply connect
a decoder and you can enjoy the variety of programming that is
available through scrambled channels.
SELECT INPUT MODE
1
Set "AV2 SELECT" to "DECODER". (
CONNECT DECODER
2
Connect your recorder's AV2 IN/DECODER connector
to the decoder's Euroconnector using a 21-pin SCART
cable.
SET TUNER
3
Perform the procedure as described in "When Receiving
A Scrambled Broadcast" on page 39.
TV Aerial
Cable
ENTREE ENTREE
ANT. IN ANT. IN
SORTIE SORTIE
OUT OUT
ANTENNE ANTENNE
SORTIE SORTIE
RF OUT RF OUT
pg. 31)