Edit To Or From Another Video; Recorder - JVC HR-J713EU Instructions Manual

30
EN
Edit To Or
From Another
Video

Recorder

1
4
7
NUMBER "0"
1
MENU
2 3
2
5 6
8 9
0
4
TV PROG
?
OK
You can use your video recorder as the source player or the
recording deck.
MAKE CONNECTIONS
1
Connect the player's 21-pin SCART (AV) connector to
the recorder's 21-pin SCART (AV) connector as
illustrated on page 31.
When Using Your Video Recorder As The Source
Player . . .
. . . connect its AV1 IN/OUT connector to the recording
deck.
When Using Your Video Recorder As The Recording
Deck . . .
. . . . connect its AV2 IN/DECODER or AV1 IN/OUT
connector to the source player.
SET RECORDING DECK'S
INPUT MODE
2
Set to AUX. With this video recorder, press NUMBER
key "0" and/or TV PROG to select depending on the
connector being used — "L-1" for the AV1 IN/OUT
connector, or "L-2" for the AV2 IN/DECODER connector.
When using the AV2 IN/DECODER connector, make
sure "AV2 SELECT" is set to "AV2" (
SET EDIT MODE
3
See "Picture Control" on page 16.
START SOURCE PLAYER
4
Engage its Play mode.
START RECORDING DECK
5
Engage its Record mode.
NOTES:
All necessary cables can be obtained from your dealer.
When you select EDIT to dub tapes in step 3, be sure to select
AUTO (or NORM when B.E.S.T. is set to OFF) after you finish
dubbing the tapes.
When you use this recorder as the player for editing, be sure
to set "O.S.D." to "OFF" before starting (
EDITING (cont.)
pg. 31).
pg. 9).