System Connections; Connection To A Satellite Tuner - JVC HR-J713EU Instructions Manual

32
EN
Connection To
A Satellite
Tuner
Outdoor Unit
Satellite Tuner Unit
DECODER VCR
Mains outlet
Back of Recorder
IMPORTANT
When you set "AV2 SELECT" to "SAT" (
possible to view a satellite broadcast with the TV set to its
AV mode even if the recorder is in Timer mode, in Stop
mode, recording or turned off. When the recorder is in
Stop mode or recording, press TV/VCR on the remote
control to turn off the VCR indicator on the display panel.
Satellite Cable
TV
pg. 31), it is
If you don't have a decoder
Connect the satellite tuner to the video recorder's AV2 IN/
DECODER connector, then connect the recorder's AV1 IN/OUT
connector to the TV's 21-pin SCART connector.
NOTES:
Set "AV2 SELECT" to "AV2". (
You can use Automatic Satellite Program Recording function
( pg. 28) with this connection.
To view a programme via the satellite tuner, select L-2 mode
by pressing NUMBER keys and/or TV PROG so that
"L-2" appears on the display panel.
For details, refer to the instruction manual for the satellite
tuner.
Aerial
Aerial
connector
TV Aerial
cable
ANT. IN
RF OUT
21-pin AV input
connector (SCART)
ENTREE/DECODEUR ENTREE/SORTIE
AV2 AV1
IN/DECODER IN/OUT

SYSTEM CONNECTIONS

. . .
pg. 31)
Back of TV
ENTREE
ANT. IN
SORTIE
OUT
ANTENNE
R
SORTIE
RF OUT
AUDIO
L