Getting Started - Palm Treo 750v Quick Start Manual

QSG_EN_NL.book Page 3 Wednesday, August 16, 2006 4:26 PM

Getting Started

1. Insert your SIM card
Press the battery door release and slide the
door to open the battery compartment. With
the metal contacts facing the compartment,
slide the SIM card into the cutout in the lower-
right corner of the compartment until you feel
the card snap into place. Align the notches to
make sure you have the card oriented correctly.
2. Insert the battery
Align the metal contacts on the battery with
the contacts inside the battery compartment,
insert the battery into the compartment at a
45-degree angle, and then press it into place.
Slide the battery door back into place.
3. Follow onscreen instructions
Follow the onscreen instructions to finish the
installation. Installation is complete when you
press Finish (right action key).
If the screen turns off, press Power/End
and then press Center
Keyguard.
4. Charge the battery
Connect the AC charger to a wall outlet and to
the bottom of your smartphone. When your
battery is fully charged, your smartphone's
indicator light glows green.
Battery door
release
Notch
,
to turn off
3
Battery contacts
Compartment
contacts
Indicator light