Draytek Vigor2920 Series User Manual page 343

Item
Access List
Management Port Setup
SNMP Setup
Description
specify.
Disable PING from the Internet - Check the checkbox to
reject all PING packets from the Internet. For security issue,
this function is enabled by default.
You could specify that the system administrator can only login
from a specific host or network defined in the list. A
maximum of three IPs/subnet masks is allowed.
List IP - Indicate an IP address allowed to login to the router.
Subnet Mask - Represent a subnet mask allowed to login to
the router.
User Defined Ports - Check to specify user-defined port
numbers for the Telnet, HTTP and FTP servers.
Default Ports - Check to use standard port numbers for the
Telnet and HTTP servers.
Enable SNMP Agent - Check it to enable this function.
Get Community - Set the name for getting community by
typing a proper character. The default setting is public.
Set Community - Set community by typing a proper name.
The default setting is private.
Manager Host IP - Set one host as the manager to execute
SNMP function. Please type in IP address to specify certain
host.
Trap Community - Set trap community by typing a proper
name. The default setting is public.
Notification Host IP - Set the IP address of the host that will
receive the trap community.
Trap Timeout - The default setting is 10 seconds.
335
Vigor2920 Series User's Guide