Draytek Vigor2920 Series User Manual page 126

Protocol
WAN
Src IP Start
Src IP End
Dest IP Start
Dest IP End
Dest Port Start
Dest Port End
Move UP/Move Down
Click any Index number link to access into the following page for configuring load-balance
policy.
Available settings are explained as follows:
Item
Enable
Protocol
Binding WAN interface
Vigor2920 Series User's Guide
Use the drop-down menu to change the protocol for the WAN
interface.
Use the drop-down menu to change the WAN interface.
Displays the IP address for the start of the source IP
Displays the IP address for the end of the source IP.
Displays the IP address for the start of the destination IP.
Displays the IP address for the end of the destination IP.
Displays the IP address for the start of the destination port.
Displays the IP address for the end of the destination port.
Use Up or Down link to move the order of the policy.
Description
Check this box to enable this policy.
Use the drop-down menu to choose a proper protocol for the
WAN interface.
Choose the WAN interface (WAN1 / WAN2 / WAN3) for
binding.
Auto failover to other WAN – Check this button to lead the
data passing through other WAN automatically when the
selected WAN interface is failover.
118