Draytek Vigor2920 Series User Manual page 142

Destination Address
Status
Set to Factory Default
Viewing IPv6 Routing
Table
Click any underline of index number to get the following page.
Available settings are explained as follows:
Item
Enable
Destination IPv6 Address
/ Prefix Len
Gateway IPv6 Address
Network Interface
After finishing all the settings here, please click OK to save the configuration.
Vigor2920 Series User's Guide
Displays the destination address of the static route.
Displays the status of the static route.
Clear all of the settings and return to factory default
settings.
Displays the routing table for your reference.
Description
Click it to enable this profile.
Type the IP address with the prefix length for this entry.
Type the gateway address for this entry.
Use the drop down list to specify an interface for this static
route.
134