Error! No text of specified style in document. Error! No text of specified style in document.
Replacement Procedures
3. Remove the HDD by pulling the tab attached to the HDD.
NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or
replace the HDD pack only if it fails.
4. Place the HDD on a flat surface such as a desk.
5. Remove the four M3x3 screws securing the HDD aluminum foil.
Satellite P770/P775 Series Maintenance Manual [CONFIDENTIAL]
Figure 4.3 Removing the HDD from the HDD bay
4
4-11