Initial Settings; Auto Set Up - JVC HR-J281 Instructions Manual

8
EN

Auto Set Up

Auto Channel Set/Auto Clock Set/
Auto Guide Program Number Set
1
After the button on the recorder or remote control is
pressed for the first time to power on the recorder, by simply
selecting your country*, the Auto Set Up function sets the
tuner channels, clock** and Guide Program numbers
automatically.
* If you live in Belgium (BELGIUM) or Switzerland (SUISSE), you also
need to select your language.
** If you live in Hungary (MAGYARORSZÁG), Czech Republic ( C ESKÁ
REPUBLIKA), Poland (POLSKA) or other countries in Eastern Europe
(OTHER EASTERN EUROPE), set the clock manually.
Before starting, make sure of the following:
The connection is completed. (
The recorder's mains power cord should be connected to a
mains outlet.
The TV should be set to its AV mode (with AV connection
pg. 7) or UHF channel 36 (with RF connection
pg. 7).
A
Turn on the recorder.
1
Press on the recorder or remote control. The Country
Set display appears on the TV screen.
NOTE:
If you have connected your TV to
the recorder with RF connection
and the on-screen display
appearing on UHF channel 36
looks distorted, perform "Video
Channel Set" on page 46.
B
Select your country.
rt
Press to move the
highlight bar (pointer) to your
country's name.
(Example) DEUTSCHLAND is
selected.
NOTES:
If you have selected BELGIUM or SUISSE, go to step 3.
If you have selected MAGYARORSZÁG, C ESKÁ REPUBLIKA,
POLSKA or OTHER EASTERN EUROPE, press OK. The Clock
Set screen will appear. Set the clock manually (
then go to step 4.
If you have selected any other country name, go to step 4.

INITIAL SETTINGS

pg. 7)
pg. 44),