Clock Set - JVC HR-J281 Instructions Manual

44
EN

Clock Set

Turn on the TV and select the video channel (or
AV mode).
Just Clock
The Just Clock function provides accurate time keeping
through automatic adjustments at regular intervals, by
reading data from a PDC signal.
The Just Clock option can be set "ON" or "OFF" at the Clock
Set screen (the default setting is "OFF"). Press OK until the
Just Clock setting begins blinking, then press
the setting.
IMPORTANT: If you turn off Just Clock, the accuracy of your
recorder's built-in clock may be reduced, which could
adversely effect timer recording. We recommend you to keep
Just Clock on. In cases where the clock setting data from a
PDC signal is incorrect, however, you are advised to keep
Just Clock set to "OFF".
IMPORTANT
If you performed Auto Set Up (
(
having set the clock previously, the recorder's built-in clock is
also set automatically.
Perform the following steps only if —
—Auto Clock Set has not been performed correctly by Auto
Set Up, Preset Download or Auto Channel Set.
OR
—the recorder's memory backup has expired.
OR
—you want to change Just Clock setting (
the left column).
A
Press
B
Press MENU.
C
Press
SET", then press OK or
D
Press
SET", then press OK or
NOTE:
When you have selected MAGYARORSZÁG, C ESKÁ
REPUBLIKA, POLSKA or OTHER EASTERN EUROPE for the
country setting (
function. Skip steps 6 and 7 on page 45.
rt
to change
SUBSIDIARY SETTINGS (cont.)
pg. 10) or Auto Channel Set (
Turn on the recorder.
1
.
Access the Main Menu screen.
Access the Initial Set screen.
rt
to move the highlight bar (pointer) to "INITIAL
e
.
Access the Clock Set screen.
rt
to move the highlight bar (pointer) to "CLOCK
e
. The Clock Set screen appears.
pg. 8, 12), you cannot use Just Clock
pg. 8), Preset Download
pg. 38), without ever
"Just Clock" in