Subsidiary Settings; Show View; Guide Program Number Set - JVC HR-J281 Instructions Manual

SUBSIDIARY SETTINGS

S V
HOW IEW
IMPORTANT
Normally, Auto Set Up (
automatically. You need to set the Guide Program numbers manually only in the following cases.
When timer-programming with the S
your recorder, is not selected,
OR
when you add a channel after Auto Set Up, Preset Download or Auto Channel Set has taken place,
—Set the Guide Program number for that station manually.
When you wish to timer-record a satellite programme with the S
—Set the Guide Program numbers for all satellite broadcasts received on your satellite receiver.
Turn on the TV and select the video channel (or
AV mode).

Guide Program Number Set

A
Access the Main Menu screen.
Press MENU.
B
Access the Initial Set screen.
rt
Press to move the highlight bar (pointer) to "INITIAL
SET", then press OK or
C
Access the Guide Program Set screen.
rt
Press to move the highlight bar (pointer) to "GUIDE
PROG SET", then press OK or
D
Enter the Guide Program number.
rt
Press or NUMBER keys to
enter the Guide Program
number for the desired station
as shown in the TV listings.
e
Then press OK or .
System Setup
®
pg. 8), Preset Download (
V system, the channel position, where the station you wish to record is received on
HOW IEW
e
.
e
.
(Example) When inputting the
Guide Program
number 2 for ZDF.
pg. 10) or Auto Channel Set (
V system,
HOW IEW
E
Enter the receiving channel position number.
rt
Press or NUMBER keys to
input the number of the
recorder's channel position on
which the Guide Program
number's broadcast is received
by the recorder. Then press OK
e
or .
If the satellite broadcast is
received on your recorder's
auxiliary channel "L-2", select
"L-2" for the channel position.
Repeat steps 4 and 5 as necessary.
F
Return to the normal screen.
Press MENU.
Guide Program Number
"Guide Program (GUIDE PROG) number" refers to the
assigned TV station numbers, according to broadcast area,
for the S
HOW
numbers can be found in most TV listings.
pg. 38) sets the Guide Program numbers
(Example) If ZDF is received on
V timer recording. The Guide Program
IEW
33
EN
channel position 2.