18
EN
Basic Recording
Turn on the TV and select the video channel (or
AV mode).
Recording Resume Function
If there is a power outage during recording, Instant Timer
Recording (
pg. 19) or timer recording (
recording will resume automatically when power is restored
to the recorder unless the recorder's memory backup has
expired.
A
Insert a cassette with the record safety tab intact.
The recorder's power comes on automatically and the counter
is reset to 0:00:00.
B
Press PR +/– or the NUMBER keys to select the channel
you wish to record.
C
Press SP/LP (
screen to confirm the selected tape speed.
D
Press and hold
press
With HR-J480EU:
B.E.S.T. takes place at the beginning of both the first SP and
the first LP recording after inserting the cassette. (
With HR-J280/281/289EU:
B.E.S.T. takes place at the beginning of the first recording
after inserting the cassette. (
If "DIRECT REC" is set to "ON", the programme that appears
on the TV screen will be recorded (
E
Press
F
Press
Then press
Accidental erasure prevention
To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
pg. 22, 24), the
Load a cassette.
Choose a programme.
Set the tape speed. (HR-J480EU only)
p
). Check the SP/LP indicator on the TV
Start recording.
7
4
and press
7
on the recorder.
Pause/Resume recording.
9
4
. Press
to resume recording.
Stop recording.
8
on the remote control or
0
to remove the cassette.
RECORDING
on the remote control, or
pg. 21)
pg. 21)
pg. 35).
0
on the recorder.
Record safety tab