Editing; Edit From A Camcorder - JVC HR-J270 Instructions Manual

EDITING

Edit From A
Camcorder
Cable adapter
(not provided)
AUDIO OUT
Camcorder
VIDEO OUT
Player
Your recorder
Audio/Video cable
(not provided)
You can use a camcorder as the source player and your
recorder as the recorder.
A
Make connections.
Connect the camcorder's AUDIO/VIDEO OUT
connectors to the recorder's AV1 (L-1) IN/OUT or AV2 (L-
2) IN/DECODER connector via a cable adapter.
B
Set the recorder's input mode.
Press AUX (NUMBER key "0") and/or PR to select "L-1"
for the AV1 (L-1) IN/OUT connector, or "L-2" for the AV2
(L-2) IN/DECODER connector, depending on the
connectors being used.
C
Set the edit mode.
See "PICTURE CONTROL" on page 37.
D
Start the camcorder.
Engage the Play mode of the camcorder.
E
Start the recorder.
Engage the Record mode of the recorder.
NOTES:
All necessary cables can be obtained from your dealer.
When you select "EDIT" to dub tapes in step 3, be sure to
select "AUTO" (or "NORM" when "B.E.S.T." is set to "OFF")
after you finish dubbing the tapes.
31
EN