Table of Contents
Advertisement
Specif ications
ITEM
DESCRIPTION
Welding Cunent
63 - 68 amps; H igh setting: 79 - 90 amps
Duty Cycle
12/" at 70 amps; 1ff/" aI50 amps
Power Consumption
110 VAC, 23 amps
Heat Control
2 settings
Ground Cable
4 AWG, single insulation, 6 foot
Torch Power Cable
I AWG, single insulation, 6 foot
Power Cord
3-core, double insulated, 14 AWG, U.L. apprwed
Power Cord Plug
CSA 738
Thermal Overload with
Light
Low setting: '10 min. shutdown,3 min. bacx on
High setting: 5 min. shutdown, 3 min. bacx on
Welder Tip
qgqq (aty 2);Will also accept 0.023" wetder tip
Wire Size
0.030 inch flex core wire
Wire Spool Size
4 inches diameter (2 lb. spool)
Overall Dimensions
14-1/2 (L) x B-1/2 (V14 x 1s-1t2 (H) inches
Weight
34.45 lbs.
Accessories
Spare Welder Tip
Wdding Face Shield
Wire Brush / Hammer combination
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice
with this
manual. Write the invoice number on the inside of the front cover. Keep the manual
and
invoice in a safe and dry place for future reference.
Safety Warnings and precautions
WARNING: When using tool, basic safety precautions should always be followed
to re-
duce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.
Keep work area clean. cluttered areas invite injuries.
2.
Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don't expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.
3.
Keep children away. Children must never be allowed in the work area. Do not let them
handle machines, tools, or extension cords.
4'
Store idle equipment. When not in use, tools must be stored in a dry location to inhibit
rust. Always lock up tools and keep out of reach of children.
sKU 44567
Page 2
REV 10/03
Hide quick links:
Advertisement
Table of Contents
