Channel Number - Polaroid TLU-44243B User Manual

6.4.2-Manual tuning of channels and
storing in the memory
6.4.2.1-If you already know the

channel number

Press the MENU button. Move to the
SETUP menu by pressing the down
movement button in Main Menu and confirm
SETUP
SYSTEM
CHANNEL
FINE TUNE
SEARCH
PROGRAM NO
STORE
AUTOPROGRAM
CHANGE
your selection with OK button. The
SETUP menu is displayed. Select
the system in which you would
like to make the search from the
System tab. Move into CHANNEL
tab by pressing the Down
movement button. Press OK on
your remote control to select "S" for
cable channels and "C" for channels
received via the antenna. Move
onto the PROGRAM NO tab and
using the number buttons enter the channel
number in which you would like to have the
channel stored. If the broadcast viewed on
the screen is of your desired quality, first
move onto the STORE tab with the down
movement button to store in the memory
the selection you have made and store
the channel by pressing the Left or Right
movement buttons. The prompt STORED
will be displayed briefly. The channel will be
stored according to the program number
of your choice. You can tune and store in
memory other channels the same way. In
the event that you wish to exit the channel
settings menu for any reason, simply press
the EXIT button.
BG
S06
0
P13
BACK
MENU
6.4.2.2-If you do not know the
channel number
Press the MENU button. Move to
the SETUP menu by pressing the
down movement button in Main
Menu and confirm your selection
with OK button. Setup menu will
be displayed. Select the system in
which you would like to make the
search from the System tab. Move
into CHANNEL tab by pressing
the Down movement button.
Press OK on your remote control
to select "S" for cable channels
and "C" for channels received via
the antenna. Select SEARCH tab
using the up/down movement buttons, and
scan the channels in ascending order with
Right movement button and in descending
order with Left movement button. If the
channel that is found is of your liking, select
the STORE tab. Then store it in the memory
by pressing the Right or Left movement
buttons. Repeat the same procedure for
other channels by selecting the program
number of your choice from the PROGRAM
NO tab. If the channel you found is not of
the desired quality and requires Fine Tuning
or if you would like to rename the channel,
refer to the relevant sections.
6.4.3-Fine Tuning
If the channel you found is not of
the desired quality and requires
Fine Tuning, then select the FINE
TUNE tab by pressing the Down
movement button in the Setup
menu. Using the Left/Right
movement buttons on your remote
control, adjust the broadcast
displayed on the screen to your
desired quality. Under normal circumstances,
you will not require to use the Fine Tune
function. The AFC values of your television
will automatically adjust and lock themselves
to the channel. However, you might need
it in case the television transmitters do not
operate according to the standards. To store
in the memory, the settings you have made,
select the STORE tab and press the Right
or Left movement button.
15 I
GB