Table of Contents
Advertisement
●
Channel Switch
Use the number buttons to choose the desired channel directly or press【CH+】/【CH-】
【CH+】/【CH-】
on the panel or
number is in SKIP ON mode, the next channel will be displayed.
A maximum of 3 digits can be keyed in at one time with the number button on the remote
control. The symbol of " - - " on the upper-right corner represents tens and one
respectively.. ,two digits are only admitted if a number input is beyond the range and the
number for hundred digit is bigger than "2".The first input number is for hundreds, if it is
"1","1- -"appears on. The TV will switch to channel 1 if no number is input in 3 seconds.
The second is for tens if it is "2","12 -"appears on. The TV will switch to channel 12 if no
number is input in 3 seconds and the third is for ones., Press 【OK】to turn to the desired
channel quickly after the corresponding number is input.
Note: This function is only available in TV mode
●
Sleep Function
Press【SLEEP】on the remote control once to
activate the function and subsequent keying in to
select the sleep time of 0, 15, 30, 45, 60,90, 120,
150,180, 240 and 0 minutes. This is will be reflected in
the top right hand corner of the screen. After this step
is done, press 【SLEEP】 to view the set sleep. See the
illustration in the right.
●
Indicator Light
Status
On/Off
Standby
Timer On/Off Or Sleep
Sleep (PC)
Receives signal from
the remote control
on the remote control to select the channel number. If a channel
Light Colour
Off
The TV works normally/is power off
Red
In Standby Mode
Green
Timer On/Off is valid or Sleep is on
Yellow
Sleep for power-saving;
The indicator will flicker when the TV
Flickering
receives signal from the remote control
15
Sleep 30
Description
Advertisement
Table of Contents
