Trane ZUSTATALP510 Manual Manual page 12

15345 ZUSTATALP51Ø Manual 2/28/05 8:15 AM Page 12
S
ETBACK
P :
ROGRAMMING
S
CHEDULING
10
•Press TIME/TEMP again to reach
Time/Temp
or change the Heat setpoint;
set it with the ARROWS. Follow
the same procedure for your
Cool setpoint.
Note: The cooling setpoint will always be
at least four degrees higher than the heating
setpoint. If one setpoint infringes on the required
four-degree separation, the Home Comfort Sensor
will automatically adjust the other to maintain
the difference.
•Press FAN to toggle the fan mode.
Fan
FAN ON is displayed when the fan
is in continuous operation.
•Press PERIOD to advance to the next
Period
setback period. EXIT will return the LCD's
normal display once you've scheduled
Exit
all setpoints.
Congratulations! You've mastered the most
important element of your Home Comfort Sensor.
Ready to move on?
SCHEDULE
Wake Away Return Sleep
AM
Mon
Heat Cool
Midnt Noon Midnt
Period
SCHEDULE
Wake Away Return Sleep
AM
Mon
Heat Cool
Fan On
Midnt Noon Midnt