Table of Contents
Advertisement
HEATER AND AIR CONDITIONING 1A-7
Fig. 10—Control Assembly (Chevrolet)
6. Remove the seven stud nuts attaching the blower
and air inlet assembly to the dash panel.
7. Remove the blower and air inlet assembly from
beneath the fender.
8. The blower assembly may be removed and dis-
assembled as described under "Blower Assembly"
above.
Installation
1. With the blower and air inlet assembly in place,
install the seven attaching stud nuts.
2. Replace the blower motor electrical connectors.
Fig. 9—Defroster Duct (Chevrolet, Chevell^, Camaro)
4. Disconnect the blower motor electrical connectors.
5. Remove the water hoses from the heater core inlet
and outlet connections.
\
N
^
1
Fig. 11-Controi Assembly (Chevelle)
CHEVROLET CHASSIS SERVICE MANUAL
Advertisement
Table of Contents
