Basic Recording; To Pause Recording; To Stop Recording; To Rewind The Tape (When It Is Not Running) - JVC HR-5910U Instructions Manual

Basic
Recording
Turn on the VCR and the TV, and select the VCR
channel 3 or 4 (or AV mode) on the TV.
POWER
POWER
REC LINK
S VIDEO
VIDEO (MONO)L—AUDIO—R
S-VHS ET
TV/VCR
1
4
7
1
REW ( 1 )
4
This VCR can check the tape condition during recording
(and playback), and realizes the best possible pictures.
Load a cassette
1
Make sure the record safety tab is intact. If not,
cover the hole with adhesive tape before
inserting the cassette.
JOG dial
PLAY ( 3 )
REW
PLAY
–
A.DUB
24HR QUICK
PROGRAM
INSERT
REC PAUSE
4
PAUSE ( 8 )
STOP/EJECT
( 7 / 0 )
POWER
2 3
2
5 6
b
–
2
8 9
0
4
a
–
2
3
FF ( ¡ )
PAUSE ( 8 )
STOP ( 7 )
Select recording channel
2
On the front panel:
Push the JOG dial, then turn it to the left or right.
On the Remote:
a– Press CH + or –.
b– Press the Number keys.
If you connect the TV and the VCR only using
the RF connection, press TV/VCR on the Remote
so that the VCR mode indicator lights on the front
display panel, to view the program to be recorded.
Set tape speed
3
Press SP/EP to set the recording speed.
FF
+ Start recording
CH– /+
PUSH / TURN
4
On the front panel:
STOP/EJECT
Press REC ( ¶ ).
On the Remote:
While holding REC ( ¶ ), press PLAY ( 3 ).
If "VIDEO CALIBRATION" is set to "ON"
(default setting:
tape condition for about seven seconds, then
starts recording. This means that the first seven
seconds of the program will not be recorded. If
this is inconvenient for you, follow the steps
below:
1
Press REC ( ¶ ) and PAUSE ( 8 ) to start
Video Calibration.
2
Then press PLAY ( 3 ) to start recording
after Video Calibration is complete.

To pause recording

Press PAUSE ( 8 ). To resume recording, press PLAY ( 3 ).

To stop recording

Press STOP ( 7 ) on the Remote or STOP/EJECT ( 7 / 0 )
on the front panel.

To rewind the tape (when it is not running)

Press REW ( 1 ) (or turn the JOG dial on the front
panel to the left).

To fast-forward the tape (when it is not running)

Press FF ( ¡ ) (or turn the JOG dial on the front panel
to the right).

To eject the tape

Press STOP/EJECT ( 7 / 0 ) on the front panel when the
tape is not running.
You can also eject the cassette with the VCR turned off.

To turn off the VCR

Press POWER.
It may be unlawful to record or play back
copyrighted material without the consent of the
copyright owner.
or
pg. 40), this VCR checks the
25
EN