Conventions; Unpacking/Delivery; Safety; Symbols Used To Mark Instructions - Viper DR 1500 H User Manual

Viper dr 1500 h user manual
Hide thumbs Also See for DR 1500 H:
Table of Contents

Advertisement

CONvENTIONS

forward, backward, front, rear, left or right and up are intended with reference to the operator's position, that is to say in working
position with the handle.

UNpACkINg/DELIvERy

to unpack the machine, carefully follow the instructions on the packing.
when the machine is delivered, check that the packing and the machine were not damaged during transportation. in case of visible
damages, keep the packing and have it checked by the carrier that delivered it. Call the carrier immediately to fill in a damage claim.

SAFETy

the following symbols indicate potentially dangerous situations. always read this information carefully and take all necessary precau-
tions to safeguard people and property.
the operator's cooperation is essential in order to prevent injury. no accident prevention program is effective without the total coop-
eration of the person responsible for the machine operation. Most of the accidents that may occur in a factory, while working or moving
around, are caused by failure to comply with the simplest rules for exercising prudence. a careful and prudent operator is the best
guarantee against accidents and is essential for successful completion of any prevention program.

SyMBOLS USED TO MARk INSTRUCTIONS

DANgER!
danger that leads directly to serious or irreversible injuries, or even death.
wARNINg!
danger that can lead to serious injuries or even death.
CAUTION!
danger that can lead to minor injuries and damage.
notE
indicates a remark related to important or useful functions.

gENERAL INSTRUCTIONS

Specific warnings and cautions to inform about potential damages to people and machine are shown below.
the appliance must
− only be used by persons, who have been instructed in its correct usage and explicitly commissioned with the task of operating
it
− only be operated under supervision
− not be used by children
the workplace is behind the cleaner.
do not use any unsafe work techniques.
always guide the cleaner with both hands on the handle.
When the cleaner is stationary, switch off the brush unit immediately to prevent damage to the floor covering.
switch off the appliance and disconnect the mains plug in the following situations:
− prior to cleaning and servicing
− prior to replacing components
− prior to changing over the appliance
Use of the cleaner is subject to current national regulations. besides the operating instructions and binding accident prevention regu-
lations valid in the country of use, observe recognized regulations for safe and proper work.
TRANSpORT
when transporting the cleaner in elevators
− observe current safety regulations, in particular with regard to carrying capacity.
− place the shaft in an upright position to prevent it from catching on elevator shaft walls.
OpERATION
take all necessary precautions to prevent hair, jewels and loose clothes from being caught by the machine moving parts.
the machine working temperature must be between 0°C and +40°C.
41528EU (1) – 2012-04-10
USER MANUAL
DR 1500 H
ENGLISH
5

Advertisement

Table of Contents
loading

Table of Contents