Panasonic SJ-MR220 Service Manual page 17

5.8. Replacement for the spindle motor
- Follow the (Step 1) - (Step 3) of item 5.1.
- Follow the (Step 1) - (Step 4) of item 5.4.
6. Measurements and Adjsutments
Note:
After replacing the main components (optical pickup or traverse motor, etc.) of mechanism unit
block, change to the adjust mode, and then perform the "laser power adjustment", "off-set auto-
adjustment" and "playback-only disc/magneto-optical disc auto-adjustment".
6.1. Instruments to prepare
1. Playback-only disc (Test disc RFKV0006)
17