Using The Timers; Setting The Clock - JVC VS-DT68V Instructions Manual

Using the Timers

1 2
4
5
7 8
10 +10
MPX
VCD No.
SET
PBC
AHB PRO BASS TREBLE
PREV. CD SELECT
PREV.
VIDEO HIGH
INTRO LIGHT RETURN
CLOCK
REPEAT /TIMER DIMMER
CLOCK
PLAY FM
MODE MODE
/TIMER
DISPLAY
COLOR /CLOSE
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
The timers let you control listening functions automatically.

Setting the Clock

(Using the Remote Control)
• When you plug the AC power cord into the wall outlet,
the time indication "0:00" blinks on the display.
• The clock must be correctly set for the timers to work.
Press the % % button.
% %
1
CLOCK
/TIMER PREV.
2
Press the CLOCK/TIMER button.
The hour digit of the time indication rapidly blinks on
the display.
Press the NEXT ¢ or 4 PREV. button
3
to set the hour.
Pressing the NEXT ¢ button moves the time forwards
and pressing the 4 PREV. button moves it backwards.
Press and hold the button to move the time rapidly.
27
STANDBY/ON
3
FM/AM
6
MD/AUX
9
CANCEL
SET
VCD No.
ON
SCREEN
NEXT
NEXT
STILL
SLEEP
SLEEP
OPEN
VOLUME
CLOCK
NEXT /TIMER
ON time, OFF time, Source, Volume
SLEEP
SLEEP indicator
4
Press the SET button.
The minute digits of the time indication rapidly blink on
the display.
Press the NEXT ¢ or 4 PREV. button
5
to set the minute.
6
Press the SET button.
The selected time is set and the seconds start counting
from 0.
CAUTION:
• If there is a power failure, the clock loses its
setting after about 20 minutes. "0:00" blinks
on the display and the clock must be reset.
• The clock may gain or lose one to two minutes per month.
• The or button operates the same as the
¢
or NEXT button does.
Timer indicator
4
PREV.