Installing The Refrigerator - Dometic RM2350 Installation And Operating Instructions Manual

Dometic refrigerator for lp-gas and electric operation
Table of Contents

Advertisement

INSTALLING THE REFRIGERATOR IN
ENCLOSURE
Dimensions
It is essential that all
maximum or minimum
dimensions are strictly
maintained, as the
performance of the
refrigerator is dependent on
adequate flow of air over
the rear of the refrigerator.
Minimum
ventilation
height
OvERALL DIMENSIONS
Height
Width
Depth
A
B
inch 30-5/32
21-7/8 22-23/32 29-3/4
mm
766
556
S
d i
e
D
H
V
e i
D
W
INSTALLATION INSTRUCTIONS
Minimum
ventilation
height
Condenser
RECESS DIMENSIONS
Height
Width
Depth
C
H
W
20-1/2
21-3/8
577
756
521
v
e i
w
A
w
f
o r
m
a
b
o
v
e
B
C
Packaging
The packaging of this appliance is design to withstand the
transportation from the factory to the point where it will be
installed in the recreational vehicle.
Before starting to install the appliance, please, make sure all
parts of the packaging have been removed, so there will not
be anything left that may come into contact with heat parts of
the appliance or obstruct the combustion exhaust gases or the
air movement around the cooling unit.
Condenser

Installing the refrigerator

The refrigerator must be installed in a substantial enclo-
sure and must be level.
Note! Do not install the appliance directly on carpeting.
Carpeting must be removed or protected by a metal or
wood panel beneath the appliance, which extends at least
full width and depth of the appliance.
The space between the storage cabinet and the top of the
refrigerator should be blocked otherwise heat will become
trapped in this space, making the top of the refrigera-
tor hot, thus reducing the efficiency of the unit. All areas
within the recess in which the refrigerator is installed must
be sealed:
Make sure that there is a complete seal between the
-
front frame of the refrigerator and the top, sides and bot-
tom of the enclosure. A length of sealing strip is applied
to the rear surface of the front frame for this purpose.
Apply a sealing strip to the
-
foremost floor of the en-
closure. The sealing should
provide a complete isolation
of the appliance's combus-
D
tion system from the vehicle
interior.
542
Note! Be careful not to
damage the sealing strip
when the refrigerator is put in place.
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents