Using The Tuner - JVC UX-V55R Instructions Manual

Using the Tuner

REMOTE CONTROL RM-RXUV5R
DIMMER SLEEP
DISPLAY FM MODE MD/AUX
AUTO
AHB PRO PRESET CD
PROGRAM RANDOM REPEAT
BASS TREBLE CANCEL
SET
UP
<
SET
PTY/EON
DOWN
PTY/EON DISPLAY MODE
TUNER
TAPE CD
BAND
4
VOLUME
You can listen to FM and AM (MW/LW) stations. Stations can be
tuned in manually, automatically, or from preset memory storage.
Before listening to the radio:
• Make sure that both the FM and AM (MW/LW) antennas
are correctly connected. (See page 3).
One Touch Radio
Just press the TUNER BAND button to turn on the System and start
playing the station you were last tuned to.
You can switch from any other sound source to the radio by
pressing the TUNER BAND button.
Tuning In a Station
1. Press the TUNER BAND button.
The Band and Frequency you were last tuned to appear on the
display.
(If the last station was selected using the preset number, the pre-
set number appears first.)
Each time you press the button, the band alternates between FM
and AM (MW/LW).
TUNER
AM FM
BAND
(on the Remote Control)
2. Select a station using one of the following
methods.
Manual Tuning
4 ¢
Press the or button on the Unit or the Remote Control
repeatedly to move from frequency to frequency until you find
the station you want.
Auto Tuning
4
If you press and hold the
Remote Control for one second or more, the frequency changes
down, or up, automatically until a station is found.
Preset Tuning using the Remote Control (Possible
only after presetting stations)
8
STANDBY/ON
FM MODE
AUTO PRESET
PHONES
UP
>
DISPLAY MODE
DOWN
Band display, Frequency display,
Preset channel
TUNER BAND
¢
When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
—————————
BAND
AM FM
TUNER
(on the Unit)
OR
¢
or button on the Unit or the
OR
CD
BAND
OPEN/CLOSE
MD/AUX TAPE TUNER CD
TUNER BAND
DOWN MULTI CONTROL UP
¢
4
PTY/EON
FM mode indicators
RDS indicators
Select the desired preset number using the Up, Down, > and <
button on the Remote Control. After 1 second the display will
show the preset number's band and frequency.
Example: Press the UP button until the preset number 12 "P12"
appears.
UP DOWN
or
Presetting Stations
You can preset up to 30 FM stations and up to 15 AM (MW/LW)
stations using the Remote Control.
Note: Preset numbers may have been set to factory test frequen-
cies prior to shipment. This is not a malfunction. You can
preset the stations you want into memory by following one
of the presetting methods below.
Manual Presetting
TUNER
BAND
When changing the Band
1. Select a band by pressing the TUNER
BAND button.
2. Press the 4 or ¢ button to tune in a sta-
tion.
3. Press the SET button.
"SET" will blink for 5 seconds.
Within 5 seconds, proceed to the next step.
When the display returns to the one set in STEP2 after 5 sec-
onds, press the SET button again.
AUTO REVERSE
AUTO TAPE SELECTOR
REV. DISPLAY
REC MODE PTY/EON MODE CLOCK
DISPLAY MODE
TIMER/
VOLUME SNOOZE
AHB PRO
(After 1 second)
—————————
SET
SET UP DOWN
or
(Within 5 seconds)
FM = 30,AM = 15
STORED
SET