Using External Equipment - JVC UX-V55R Instructions Manual

Using External Equipment

Listening to External
Equipment
You can listen to external equipment such as MD recorder, turntable, etc.
First make sure that the external equipment is properly connect-
ed to the System. (See page 4).
1. Set the VOLUME control to the minimum
position.
2. Press the MD/AUX button.
"AUX" appears on the display.
3. Start playing the external equipment.
4. Adjust the VOLUME control to the desired
listening level.
5. Apply sound effects, if you wish.
Press the AHB PRO button to reinforce the bass sound.
Press the BASS/TREBLE button on the Remote Control to con-
trol the tone. (See "Tone Control" on page 7.)
To exit MD/AUX mode, you will automatically switch out of
MD/AUX mode when you select another source.
Note: For operation of the external equipment, refer to its Instruc-
tions.
REMOTE CONTROL RM-RXUV5R
DIMMER SLEEP
DISPLAY FM MODE MD/AUX
MD/AUX
AUTO
AHB PRO PRESET CD
PROGRAM RANDOM REPEAT
BASS TREBLE CANCEL
UP
SET
DOWN
PTY/EON DISPLAY MODE
TUNER
TAPE CD
BAND
VOLUME
STANDBY/ON
CD
BAND
OPEN/CLOSE
MD/AUX TAPE TUNER CD
DOWN MULTI CONTROL UP
PHONES
Recording the System's
source to External Equipment
You can record the System's source to external equipment which is
connected to the LINE OUT or OPTICAL DIGITAL OUT termi-
nals of the System, such as cassette deck, MD recorder, etc.
First make sure that the external equipment is properly connect-
ed to the System. (See page 4).
1. Play the System's CD Player, Cassette
Deck, or tune into a station.
The recording level is not affected by the VOLUME level set by
the System. Also it is not affected by the sound effects.
Note: For operation of the external equipment, refer to its Instruc-
tions.
MD/AUX
17