JVC UX-A52 Instructions Manual page 80

On the remote control ONLY:
1
Press CLOCK/TIMER repeatedly until "DAILY
TIMER" appears on the display.
The timer ( ) indicator lights, and the DAILY
indicator starts flashing on the display.
Timer indicator
Timer mode
• Each time you press the button, the timer mode
changes as follows:
REC TIMER
Canceled
2
Press 4 to select "ON," then press SET.
3
Select the source to play.
1) Press ¢ or 4 repeatedly to select the source.
• Each time you press the buttons, the source
changes as follows:
FROM TAPE
FROM CD
FROM AM
2) Press SET.
• When you have selected "FROM FM" or
"FROM AM," select a preset number by pressing
¢ or 4 (for how to preset stations, see
page 15.)
• When you have selected "FROM AUX," the
external equipment also needs to have the timer
function.
3) Press SET again.
4
Set the timer-on and timer-off time.
1) Press ¢ or 4 repeatedly to select the hour of
the timer-on time, then press SET.
The minute digit of timer-on time starts flashing on
the display.
»
Timer-on time Timer-off time
DAILY indicator
DAILY
DAILY TIMER
TIME ADJUST
FROM AUX
FROM FM
»
2) Press ¢ or 4 repeatedly to select the minute
of the timer-on time, then press SET.
The hour digit of timer-off time starts flashing on
the display.
3) Press ¢ or 4 repeatedly to select the hour of
the timer-off time, then press SET.
The minute digit of timer-off time starts flashing on
the display.
4) Press ¢ or 4 repeatedly to select the minute
of the timer-off time, then press SET.
5
Adjust the volume level.
1) Press ¢ or 4 repeatedly to adjust the volume
level.
• You can adjust the volume level within the range
of 0 (silent) to 40 (maximum.)
• When you select "VOLUME – –," the volume is
set to the current volume level.
2) Press SET.
• The settings you have done are shown on the
display in sequence.
• The DAILY indicator stops flashing and remains
lit on the display.
6
Press STANDBY/ON to turn off the unit (on
standby.)
To turn off the Daily Timer after its setting is done,
1 Press CLOCK/TIMER repeatedly until "DAILY
TIMER" appears on the display.
2 Press ¢ to select "OFF," then press SET.
The timer ( ) and DAILY indicators go off from the
display.
To turn on the Daily Timer again, press 4 to select
"ON," then press SET.
The timer ( ) and DAILY indicators light on the
display.
The settings you have done are shown on the display for
your confirmation.
If the unit is kept turned on until the timer-on time
comes
Daily Timer does not work at all.
Daily Timer will be canceled and the unit will not
turn off automatically in the following:
• When you change the source.
When you unplug the AC power cord or if a power
failure occurs
The timer setting, the tuner preset stations and other settings will
be erased.
– 33 –