Tuner Operations; Setting The Am Tuner Interval Spacing; Manual Tuning - JVC TH-S77 Instructions Manual

Tuner operations

IMPORTANT
Before using the remote control for the
following operation;
1 Set the remote control mode selector to
AUDIO.
2 Press FM/AM.
NOTE
• When FM or AM is selected as the source, you can select All Channel
Stereo (ALL ST) and SURR OFF mode.
The buttons described below are used on pages 37 and
38.
FM/AM
TUNING
MEMORY
Setting the AM tuner
interval spacing
Some countries space AM stations 9 kHz apart, and some countries
use 10 kHz spacing.
You can only change the AM tuner interval spacing while tuning
into an AM station.
• You can operate the following procedures using the buttons on
the front panel.
On the center unit ONLY:
7 To change the interval spacing into 10 kHz
Press 8 while holding down 7.
7 To change the interval spacing into 9 kHz
Press 3 while holding down 7.
37
FL DISP.
FL DISP.
Remote control
AUDIO
mode selector
TUNING
FM MODE
Number buttons

Manual tuning

1
Press FM/AM repeatedly to select the
band.
Example:
When the system is tuned in to 810 kHz.
AM
2
Press TUNING 9/( repeatedly until
you find the frequency you want.
When you hold down the button until the system starts
searching for stations and then release it, the system stops
searching automatically when a station of sufficient signal
strength is tuned in to.
NOTE
• When an FM stereo program is received, the ST indicator lights on the
display window.
8 1 0
kHz