Self-Diagnosis Function - Sony Handycam DCR-HC16E Service Manual

SECTION 1 SERVICE NOTE

1-2. SELF-DIAGNOSIS FUNCTION

1. SELF-DIAGNOSIS FUNCTION
When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the viewfinder, or LCD
screen what to do.
Details of the self-diagnosis functions are provided in the Instruction
manual.
Viewfinder or LCD screen
Repaired by:
C : Corrected by customer
H : Corrected by dealer
E : Corrected by service
engineer
Note: The "self-diagnosis display" data will be kept even if the lithium battery (BT501 of MS-200 board) is removed.
DCR-HC16E/HC18E/HC20/HC20E
C : 3 1 : 1 1
Blinks at 3.2Hz
C 3 1
Block
Indicates the appropriate
step to be taken.
E.g.
31 ....Reload the tape.
32 ....Turn on power again.
2. SELF-DIAGNOSIS DISPLAY
When problems occur while the unit is operating, the counter of the
viewfinder or LCD screen consists of an alphabet and 4-digit number,
which blinks at 3.2Hz. This 5-character display indicates the
"repaired by:", "block" in which the problem occurred, and "detailed
code" of the problem.
1 1
Detailed Code
Refer to page 1-4.
Self-diagnosis Code Table.
— 2 —