JVC RX-DP10VBK Instructions Manual page 72

To change the transmittable signals for
operating a DVD player
1. Press and hold VCR 1
(STANDBY/ON).
2. Press DVD.
Remote's display
3. Enter manufacturer's code using
buttons 1–9, and 0.
See page 70 to find the code.
4. Release VCR 1 (STANDBY/ON).
After pressing DVD (or DVD MULTI only for the main room
operation), you can perform the following operations on a DVD
player:
1 – 9, 0, +10 : Selects the titles or the chapters.
PLAY : Starts playing.
4
: Returns to the beginning of the current (or
previous) chapter.
¢
: Skips to the beginning of the next track.
STOP
: Stops playing.
PAUSE : Stops playing temporarily. To release it, press
PLAY.
After pressing DVD
MENU (only for the main
room operations), these
buttons can be used for the
DVD menu operations.
Note:
Refer also to the manual supplied for your DVD player (and the
instruction supplied for the discs).
5. Try to operate your DVD player by pressing one
of the above buttons.
• DO NOT forget to turn on the DVD player before pressing
one of the above buttons.
If there are more than one code listed for your brand of DVD
player, try each one until the correct one is entered.
To change the transmittable signals for
operating a CD player
1. Press and hold AUDIO (ON).
2. Press CD.
Remote's display
69
VCR 1
STANDBY/ON
DVD
1 2
4 5
7 8
/P
10 0
RETURN FM MODE
SET
DVD
MENU
STANDBY ON
CD
3. Enter manufacturer's code using
buttons 1–9, and 0.
See page 70 to find the code.
4. Release AUDIO (ON).
After pressing CD, you can perform the following operations on
a CD player:
1 – 9, 0, +10 : Selects the tracks.
PLAY
: Starts playing.
EFFECT
REW : Fast-reverses the tracks.
3
ROOM SIZE
FF
: Fast-forwards the tracks.
6
STOP : Stops playing.
LIVENESS
9
PAUSE
: Stops playing temporarily. To release it, press
WALL
PLAY.
+ 10
100 +
Note:
Refer to the manual supplied for your CD player.
5. Try to operate your CD player by pressing one of
the above buttons.
• DO NOT forget to turn on the CD player before pressing one
of the above buttons.
If there are more than one code listed for your brand of CD,
try each one until the correct one is entered.
Manufactures' codes for TV
Manufacturer
JVC
AKAI
BLAUPUNKT
FISHER
GRUNDIG
HITACHI
IRADDIO
ITT/NOKIA
LOEWE
MAGNAVOX
METS
MATSUSHITA
MITSUBISHI
MIVAR
NEC
NORDMENDE
OKANO
PANASONIC
PHILIPS
PIONEER
RCA/PROSCAN
SABA
SAMSUNG
SANYO
SCHNEIDER
SHARP
SONY
TELEFUNKEN
THOMSON
TOSHIBA
ZENITH
*This figure is set to the remote control as the initial JVC code.
EFFECT
1 2 3
ROOM SIZE
4 5 6
LIVENESS
7 8 9
/P
WALL
10 0 + 10
100 +
RETURN FM MODE
Codes
00*, 13, 74
01, 02
03, 04
01, 05
03, 06, 07
08, 09, 10, 49, 78
02
11, 12
06, 15, 16
08, 17, 49
50, 51, 52, 53
86, 87
08, 18, 19, 20
21
83
22, 23
15
24, 25, 26, 27, 76
15, 17, 28, 75
85
08, 24, 29, 30, 31, 48
32, 33, 68, 69, 70
06, 08, 16, 34, 35, 49
01, 05, 81
02, 15, 36
37, 38, 77, 88
39, 80
40, 41, 42, 69
71, 72
37, 43, 44, 79
45, 46