Initial Setup of au Media Tuner
To watch TV (1Seg) using the au Media Tuner, you need to
configure initial settings.
When the standby screen is displayed, press [.
➡
Use E to select TV and then press
[ (Select).
➡
Use G to select TV(1Seg) and then press
[ (Select).
Disclaimer notes are displayed.
➡
Use G to check the disclaimer notes, use G
to select OK, and then press [ (選択 [Select]).
The initial setting screen for using the au Media Tuner is
displayed.
•
Follow the on-screen instructions to configure each
setting. Then, the screen for setting TV (1Seg)
channels appears.
Use G to select オート設定(放送波) (Auto
➡
(Broadcasting wave)) and then press [ (選択
[Select]).
Automatic channel scanning begins. When receivable
channels are found, the channel setup is completed.
Select マニュアル設定 (Manual) to set the channel
•
manually.
0
Watching TV (1Seg)
When the standby screen is displayed, press [.
➡
Use E to select TV and then press
[ (Select).
➡
Use G to select TV(1Seg) and then press
[ (Select).
■
To Change Channels
You can use the number keys to directly change the
channel. Alternatively, you can press F, L or M to
change the channel.
You can select TV (1Seg) and EZ Channel-Plus/EZ Channel
programs.
TV (1Seg)
Change channels one by one.
1ch
EZ Channel-Plus/EZ Channel
Program 16
Program 2
•
Before using this feature, you must configure au Media
Tuner initial settings (see the procedure on the left).
•
Channels cannot be changed by using F when the
data operation screen is displayed.
2ch
12ch
Program 1