Table of Contents
Advertisement
Initial Setup of au Media Tuner
To watch TV (1Seg) using the au Media Tuner, you need to
configure initial settings.
When the standby screen is displayed, press c.
➡
Use a to select TV/RADIO and then press
c (Select).
➡
Use j to select TV(1Seg) and then press
c (Select).
Disclaimer notes are displayed.
➡
Use j to check the disclaimer notes, use j
to select OK, and then press c (選択 [Select]).
The initial setting screen for using the au Media Tuner is
displayed.
•
Follow the on-screen instructions to configure each
setting. Then, the screen for setting TV (1Seg)
channels appears.
Use j to select オート設定（放送波） (Auto
➡
(Broadcasting wave)) and then press c (選択
[Select]).
Automatic channel scanning begins. When receivable
channels are found, the channel setup is completed.
Select マニュアル設定 (Manual) to set the channel
•
manually.
Watching TV (1Seg)
When the standby screen is displayed, press c.
➡
Use a to select TV/RADIO and then press
c (Select).
➡
Use j to select TV(1Seg) and then press
c (Select).
■
To Change Channels
You can use the number keys to directly change the
channel. Alternatively, you can press s, L or R to
change the channel.
You can select TV (1Seg) and EZ Channel-Plus/EZ Channel
programs.
TV (1Seg)
Change channels one by one.
1ch
EZ Channel-Plus/EZ Channel
...
Program 16
Program 2
•
Before using this feature, you must configure au Media
Tuner initial settings (see the procedure on the left).
•
Channels cannot be changed by using
data operation screen is displayed.
...
2ch
12ch
Program 1
s when the
U
7
Advertisement
Table of Contents
