Replacing The Battery Pack - Sharp SH002 Manual Manual

Replacing the Battery Pack

■
Removing the Battery Pack
➡
Move the lock slider in the direction of the
arrow.
➡
Remove the battery pack cover on the back of
the cell phone by lifting it up.
➡
Remove the battery pack by pulling up on the
PULL tab.
2 2
1 1
Lock slider Lock slider
■
Attaching the Battery Pack
➡
With the PULL tab resting on to the top of the
battery pack, check the contacts position on
the cell phone and then attach the battery pack
securely.
➡
Insert the tab of the battery pack cover into the
groove of the cell phone, and then close the
battery pack cover properly.
➡
Move the lock slider to the "LOCK" position in
the direction of the arrow.
3 3
PULL tab PULL tab
Battery pack Battery pack
1 1
PULL tab PULL tab
Contacts Contacts
2 2
• When removing the battery pack, always pull up on
the PULL tab. Doing otherwise may result in damage
to the contacts.
• When removing the battery pack, turn the cell phone
power off.
• Before attaching the battery pack, make sure that the
au IC-Card is inserted.
• When attaching the battery pack, make sure that the
battery pack cover is closed properly so that it does
not open so as to maintain water resistance.
• Failure to follow the correct procedure when removing
or attaching the battery pack may result in damage to
the battery pack or the battery pack cover.
3 3
Lock slider Lock slider
9