Entering Titles; Available Characters - JVC NX-DV3 Instructions Manual

6
Press (right) on the main unit to
eject the MD.
NOTE
• Number of characters that can be entered to an MD
You can enter up to 1792 characters to each MD,
with up to 61 characters to each track. However,
the actual number of characters that you can
enter is less than the number indicated here
because of restrictions of the MD writing method.
Spaces are counted as characters.
When you use long-play stereo recording (LP2 or
LP4), the larger the number of tracks is, the
smaller the number of characters that you can
enter, because "LP: " and 4 spaces are automati-
cally added to each track.
You can set this product so that "LP: " is not
added to tracks. (
Example: When editing 120 tracks recorded
using long-play stereo recording to an
MD, you can enter 10 characters to
each track.
• You cannot edit a title consisting of 62 or more
characters. When you want to edit a title contain-
ing 62 or more characters, edit the title on the
equipment on which the title was entered.
• You can set a title during recording.
• While recording from a CD (except when
recording only one track from a CD), you can
enter up to 16 track titles before recording
finishes.
• If you do not press
finishes, the entered titles are not stored.
• During group recording, you can enter titles for
the group.

Entering Titles

Example: To enter "F"
1) Press repeatedly to select "A" as the
character type.
2) Press repeatedly to display "F".
Character entry position
(flashing)
Selected character type:
[A]:Uppercase characters or symbols
[a]:Lowercase characters or symbols
[1]:Numerical characters
• Several characters are assigned to one button.
Press the button repeatedly until the desired
character is displayed.
• For the available characters, refer to "Available
Characters" ( on the right).
Editing MDs
page 51)
before recording
To move the character entry position
• Press or .
• When you want to enter "NO", "TV" or two char-
acters which are assigned to one button, enter
the first character, press
ter entry position to the right, and then enter the
second character.
To erase a character
• Move the character entry position to the charac-
ter you want to erase, and press
To enter a space
• Select the space from "Symbol" (
below). You can also enter a space at the end of
a title by pressing
To quit title entry
• Press or
not stored.

Available Characters

Uppercase
Button
character
Symbol*
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
*Available symbols
Space
to move the charac-
.
the chart
.
. The entered titles are
Lowercase Numerical
character
character
Symbol*
1
2
abc
3
def
4
ghi
5
jkl
6
mno
7
pqrs
8
tuv
9
wxyz
0
56