Listening To Radio Broadcasts; Setting The Am Tuner Spacing; Selecting A Radio Station - JVC NX-DV3 Instructions Manual

Listening to Radio Broadcasts

Basic Operations/Listening to Radio Broadcasts
This product can receive FM and AM radio broad-
casts.
CAUTION
• Set the remote control mode selector to
AUDIO before using the number buttons.

Setting the AM Tuner Spacing

Some countries space AM stations 9 kHz apart,
and other countries use 10 kHz spacing.
On the main unit ONLY:
FM/AM
■When the main unit is turned off
To select 10 kHz spacing, while holding down
on the main unit, press
turn on the power. "AM 10 kHz" appears in the
display window.
To select 9 kHz spacing, while holding down
the main unit, press
on the power. "AM 9 kHz" appears in the display
window.
NOTE
• If the spacing is switched, the memory in which the
radio stations were stored will be erased.

Selecting a Radio Station

1
Press repeatedly to select
"FM" or "AM".
Example: Display while an FM radio broadcast
is received
( page 23)
2
Press or
select a radio station (frequency).
• You can also select a radio station using the
automatic tuning.
Automatic tuning:
Hold down or
starts changing, and then release the but-
ton.
When the main unit has received a broad-
cast, the frequency automatically stops
changing.
To quit the function while searching for a
broadcast, press
• When the main unit has received an FM
stereo broadcast, "ST" lights up.
NOTE
• If an FM stereo broadcast is difficult to hear
because of noise, you may be able to hear more
easily by pressing
monaural reception. In this case, "MONO" lights up.
To return the sound to stereo reception, press
again or select another FM radio station.
on the main unit to
on
on the main unit to turn
repeatedly to
until the frequency
or .
to switch the sound to
22