Bushnell ImageView 78-7348 Instruction Manual page 7

c. Select 50 Hz or 60 Hz settings for the camera output by pressing the SNAP button. Then press
MODE button to confirm and enter next setting. The camera's default mode is the "60" mode,
which matches the power frequency for the United States. To change to the "50" mode, press the
SNAP button until the "60" changes to "50". Confirm the selection by pressing the SNAP
button. To avoid any flickering on the picture, the correct power frequency (either 50 or 60) for
your country must be selected.
d. Escape the Setting mode by pressing the SNAP button.
15. The battery mark keeps tracking the battery life. If the battery indicator
is blinking, it is necessary to replace the batteries soon.
REMOTE SHUTTER
The remote shutter is recommended for the best stability while taking images.
78-7348 1LIM.indd 7
6
6/17/04 9:48:22 AM