Bushnell ImageView 78-7348 Instruction Manual page 4

5. The mode setting operation is a cycle loop, so press the MODE button to switch to another mode.
The loop order of the different modes is shown here:
6. To change settings, toggle through the different modes by pressing the MODE button. When a
mode is selected, the indicator symbol on the LCD will appear. You can then select that mode by
pressing the SNAP button.
7. When in "Normal" mode, press SNAP to take a picture.
8. By pressing the MODE button the camera will enter "Mode Change".
9. To select "Self-Timer" mode, press MODE and the self -timer mark appears, then press SNAP
and the camera will take a picture after a 10 second delay. The camera exits self-timer mode
automatically after capture is done and the self-timer mark disappears on the LCD at the same
time.
Press MODE->
3
78-7348 1LIM.indd 4
Press SNAP->
press SNAP to capture.
6/17/04 9:48:20 AM