Outgoing Calls
Automatic Redial1
d
24
Downloaded from
www.Manualslib.com
Automatic Redial
If you call an external number and receive busy tone or get no
answer, you can instruct the system to automatically redial the
number until it is available.
This function is activated via Function keys, so you first have to
program a programmable key (one key required per number). See
section
Automatic Redial on up to five external numbers at the same time.
Activate
Ô
During the call:
Press to activate (pre-programmed).
The Automatic Redial lamp is rapidly flashing and is lit when the
í
request is stored and activated. Verification tone.
or
Replace the handset or press to finish the procedure.
You are called back if the called number finishes the ongoing call or
the next time the extension finishes a new call. The display shows:
AUTO REDIAL CALL
ANDERSEN ANDREAS
directory
u
Lift the handset when you are called back.
(You can also press the Line or Loudspeaker key to answer in
handsfree mode.)
manuals search engine
Note: This feature could be restricted. Ask the system
administrator for the availability.
"Program a
function" on page 101. You can activate
BusinessPhone – Dialog 4223 Professional / Dialog 3213
200
redial
prog