Sym GTS 250 Service Manual page 209

17. Electrical System
Replacement the meter bulbs
Remove the meter board waterproofing rubber.
Uses the "-" screw driver turn the indicator bulb
seat in C.C.W. direction, and take out the indicator
bulb.
Uses the round nose pliers turn the illumination
bulb seat in C.C.W. direction, and take out the
illumination bulb.
Specification:
Indicator bulb 12V 1.7W
Illumination bulb 12V 1.7W
17-18
To this chapter contents
Indicator bulb
Illumination bulb