GBC Ultima 65 Service Manual page 29

6.2.1 Ultima 65 Roller Pressure Adjustment (Continued)
1. Turn machine off.
2. Remove right and left side covers.
3. Adjust the rear Pull Rollers. The eyebolt on the right and left side should be tightened until
only 4-5 threads are showing above the adjusting nut.
4. Adjust the front Heat Tube (Rollers). The Pressure Hex Screw on the right and left side should
be flush with the top of the roller bracket.
5. Run a test product and readjust if necessary.
6.0 ADJUSTMENTS
6-2