Using The Information System; Display A Low Temperature - Skoda 2014 Rapid Spaceback Owner's Manual

Using the information system

Fig. 26 Buttons/adjustment wheel: on the operating lever / on the multi-
function steering wheel

Read and observe on page 41 first.
Some functions of the information system can be operated using the buttons
on the multifunction steering wheel
Description of the operation
Button /
adjust-
Action
ment
wheel
Briefly press at the top
or below for a longer
time
A
Press top
or below for a longer
time
Press briefly
B
Press briefly
C
Press and hold button
1)
Applies to vehicles with the multifunction display (MFA).
42
Using the system
» Fig. 26.
Operation
Select data / set data values
Display main menu of the
MAXI DOT display » page 46
View information / confirm specification
To go up one level in the menu of the
MAXI DOT display » page 46
Display main menu of the
MAXI DOT display » page 46
Button /
adjust-
Action
ment
wheel
Turn upwards or down-
wards
D
Press briefly

Display a low temperature


Read and observe on page 41 first.
Prompt in the MAXI DOT display
If the outside temperature while driving drops to below +4°C, the following
icon appears on the display in front of the temperature display . An audible
signal is emitted.
If the outside temperature is already below +4°C when turning the ignition on,
the  icon appears immediately.
Prompt in the segment display
1)
If the outside temperature while driving drops to below +4°C, the temperature
display » page 45, Outside temperature will show up with the following icon
in front . An audible signal is emitted.
If the outside temperature is already below +4°C when turning the ignition on,
the temperature display and the  icon appear immediately.
After pressing button » Fig. 26
A
ta is shown.
WARNING
Even at outside temperatures of around +4 °C, black ice may still be present
on the road surface! You should therefore not rely solely on the outside
temperature display for an indication of whether there is black ice on the
road.
Operation
Select data / set data values
View information / confirm specification
on page 42, the most recently displayed da-