Table of Contents
Advertisement
Turning On/Off the System
Press
.
• While the System is turned off, pressing one of
the buttons below also turns on the System.
Remote control:
Main unit:
The corresponding source will be selected by
pressing one of these buttons except
Playback automatically starts if the selected
source is ready.
Adjusting the Volume
Press
.
NOTE
• You can also adjust the volume by turning the
VOLUME control on the main unit.
• You can adjust the volume within the range of "0" to
"40".
Temporarily Turning Off the
Sound (FADE MUTING)
Press
.
• "FADE MUTING" appears on the display window
and the volume will be set to minimum.
• To restore the sound, press
Press
• Each time you press
• When the AHB PRO function is activated,
.
Press
• Each time you press
again.
• When the sound mode is set to an item other
Emphasizing Bass Sound
(AHB PRO)
.
Hyper Bass PRO) function changes between
"AHB PRO ON" (initial setting) and "AHB PRO
OFF."
lights on the display window.
Sound Mode
Sound mode
A combination of JVC sound technologies
enables you to select the desired sound pattern.
repeatedly.
follows:
than "SOUND MODE NORMAL,"
on the display window.
NOTE
α
• When
SOUND is activated (
the SOUND MODE cancels
automatically and vice versa.
• This function does not affect recording sound.
, the AHB PRO (Active
, the display changes as
: For lively sound.
: For energetic sound.
: For soulful sound.
: For vibrant sound.
: Cancels the sound
mode (initial setting).
lights
page 10), using
α
SOUND
9
Advertisement
Table of Contents
