Alignment And Adjustments; Vcr Adjustment; Location Of Adjustment Button Of Remote Control - Sony SLV-ED343ME Service Manual

QQ
3 7 63 1515 0

5. ALIGNMENT AND ADJUSTMENTS

5-1 VCR ADJUSTMENT

1) X-Point (Tracking center) adjustment, "Head switching adjustment" and "NVRAM option setting" can be adjusted with remote control.
2) When replacing the Micom (IC601) and NVRAM (IC605 ; EEPROM) be sure to adjust the "Head switching adjustment" and
"NVRAM option setting".
3) When replacing the cylinder ass'y, be sure to adjust the "X-Point" and "Head switching adjustment".
4) How to adjustment.
- Press the "SW702" button on Main PCB to set the adjustment mode.
- If the corresponding adjustment button is pressed, the adjustment is performed automatically.
- If the adjustment is completed, be sure to turn the power off.

5-1-1 Location of adjustment button of remote control

TE
L 13942296513
www
.
http://www.xiaoyu163.com
X-Point (Tracking Center) Adjustment
Head Switching Adjustment
x ao u163
y
SINGLE
i
http://www.xiaoyu163.com
SLV-ED343ME/ED343SG/ED949ME/ED949SG/
EZ141AZ/EZ745AZ/GA59ME/GA59SG
2 9
8
Q Q
3 6 7 1 3 1 5
("5" Button)
("SP/LP" Button)
NVRAM Option Setting
("MENU" Button)
co
.
Fig. 5-1
5-1
9 4 2 8
0 5 8 2 9 9 4 2 8
m
MULTI
9 9
9 9