Data Rate Calculations; Figure 121 - Bpsk 0.63 Single Payload; Figure 122 - Qpsk 0.63 Single Payload - Motorola PTP 600 Series User Manual

15

Data Rate Calculations

To aid the calculation of data rate throughput, the following plots of throughput verses link
range have been produced for all the PTP 600 Series modulation modes, assuming the units
are connected using Gigabit Ethernet.
Aggregate data rate capacity can be calculated using four key system parameters:
•
Receive modulation mode
•
Transmit modulation mode
•
Range Between the two wireless units
•
Wireless link mode (IP or TDM)
Using these parameters the Receive and Transmit data rates can be looked up using the
plots Figure 121 through Figure 133.

Figure 121 - BPSK 0.63 Single Payload

Figure 122 - QPSK 0.63 Single Payload

205