Join Function; Moving Tracks; Move Function; Erasing Tracks - JVC FS-MD9000 Instructions Manual

Note: While "UTOCwriting" is displayed, do not disconnect the
power cord or subject the Unit to the vibration to avoid in-
correct recording.
Joining Tracks

(JOIN Function)

Use the Remote Control to carry out this function.
1. Insert an MD to be edited with its label side up.
2. Press the MD 38 button and then 7 button
to set the function to MD.
The track numbers and total playback time are displayed.
3. Press the EDIT/TITLE button until "JOIN ?"
is displayed.
The "EDIT" indicator appears on the display.
= = =
DIVIDE JOIN MOVE
= =
TITLE TITLE (Back to the beginning)
4. Press the SET button.
EDIT
/TITLE
SET
5. Select the track number to be joined.
To select the track number, press the UP, DOWN, >, or < button.
(For details, see step 5 in "Dividing Tracks (DIVIDE Function)".)
Example: Track number 2.
Track to be joined
6. Press the SET button.
Alternates
SET
7. Press the EDIT/TITLE button.
The selected track and the previous track are joined and the
track numbers in the music calender will decrease by 1.
• Then the "EDIT" indicator disappears on the display.
8. Press the MD0 button to complete editing.
The MD is ejected after "UTOCwriting" is displayed.
• You can also complete editing operation by pressing the
POWER button to turn off the power.
To cancel the operation, press the CANCEL button in step 4, 5,
or 6 until the display returns to the original display before editing
the track.
Note: While "UTOCwriting" is displayed, do not disconnect the
power cord or subject the Unit to the vibration to avoid in-
correct recording.

Moving Tracks

(MOVE Function)

Use the Remote Control to carry out this function.
1. Insert an MD to be edited with its label side
up.
2. Press the MD 38 button and then 7 button
to set the function to MD.
The track numbers and total playback time are displayed.
16
= =
ERASE ALL ERASE DISC
Selected track
3. Press the EDIT/TITLE button until "MOVE ?"
is displayed.
The "EDIT" indicator appears on the display.
= = =
DIVIDE JOIN MOVE
= =
TITLE TITLE (Back to the beginning)
4. Press the SET button.
EDIT
/TITLE
SET
5. Select the track number to be moved.
To select the track number, press the UP, DOWN, >, or < but-
ton. (For details, see step 5 in "Dividing Tracks (DIVIDE Func-
tion)".)
Example: Track number 12.
6. Press the SET button.
7. Select the destination to which the track is
to be moved.
To select the track number, press the UP, DOWN, >, or < but-
ton.
In this example, the 12th track will move to the 14th track.
(Since, the 12th track is lost, the upper tracks than the 12th one
will be shifted toward the younger tracks.)
Destination track Track to be moved
8. Press the SET button.
Alternates
SET
9. Press the EDIT/TITLE button.
The "EDIT" indicator disappears on the display.
Press the MD0 button to complete editing.
10.
The MD is ejected after "UTOCwriting" is displayed.
• You can also complete editing operation by pressing the
POWER button to turn off the power.
To cancel the operation, press the CANCEL button in step 4
through 8 until the display returns to the original display before ed-
iting the track.
Note: While "UTOCwriting" is displayed, do not disconnect the
power cord or subject the Unit to the vibration to avoid in-
correct recording.

Erasing Tracks

(ERASE Function)

Use the Remote Control to carry out this function.
1. Insert an MD to be edited with its label side
up.
= =
ERASE ALL ERASE DISC
Track to be moved